 |
 NEW Corner TV Wall Mount for Toshiba 37 LCD 37E200U  US $52.99
|
 NEW Corner TV Wall Mount for Emerson 32 LCD LC320EM2 US $52.99
|
 Universal Plasma LCD LED TV Wall Mount Bracket MHA 72 US $123.49
|
 NEW Corner TV Wall Mount for Toshiba 32 LED 32SLV411U US $52.99
|
 NEW Corner TV Wall Mount for Samsung 32 LED UN32EH4000 US $52.99
|
 NEW Corner TV Wall Mount for Samsung 40 LED UN40ES6100 US $52.99
|
 PlasmaLCD LED Flat Panel Universal Wall Mount US $139.99
|
 Peerless CM850 Wall Mount 32 in 58 in Cantilever Corner Black US $557.98
|
 New Corner TV Wall Mount for 37 Toshiba LCD LED US $49.99
|
 New Corner TV Wall Mount for 32 Toshiba LCD LED US $49.99
|
 New Corner TV Wall Mount for 26 Toshiba LCD LED US $49.99
|
 New Corner TV Wall Mount for 24 Toshiba LCD LED US $49.99
|
 |
Cheetah Mounts 32"-55" Articulating LCD TV Wall Mount Bracket with Full Motion Swing Out Tilt & Swivel Dual Arms for Flat Screen Flat Panel LED Plasma Displays List Price: $249.99 Sale Price: $39.95 Used From: $44.33  |
|
This is a solid mount, the wall plate is 17.7" wide, allowing it to be mounted into two standard studs 16" apart. This provides a stable two stud installation for displays in the 32-55" size range. This mount will fit hole patterns up to VESA 400x400 (16"x16")... |
 |
Cheetah Mounts Plasma LCD Flat Screen TV Articulating Full Motion Dual Arm Wall Mount Bracket For 32-65" Displays Up To 165LBS Black With 10' High Speed HDMI Cable With Ethernet Fits Up To 24" Studs List Price: $189.96 Sale Price: $64.00 |
|
This is a very substantial mount with Dual arms and heavy gauge steel. The arms extend over 20" from the wall yet fold to less than 4.25". Even at full extension, this mount has very little sag or twist... |
 |
Cheetah Mounts APSAMB 32-55" LCD TV Wall Mount Bracket with Full Motion Swing Out Tilt & Swivel Articulating Arm for Flat Screen Flat Panel LCD LED Plasma TV and Monitor Displays Includes Free 10' Braided High Speed HDMI Cable With Ethernet List Price: $159.96 Sale Price: $31.90 |
|
The APSAM universal articulating arm mount supports virtually any display up to 55-Inch with hole patterns up to 27.7-Inch horizontally and 19-Inch vertically. The APSAM also features a full 27-Inch of extension and up to 150 degrees of rotation for larger displays, it also folds to a low 3... |
 |
VideoSecu Articulating TV Wall Mount, Full Motion Tilt Swivel and Rotate Articulating Arm for Most 15" 17" 19" 20" 22" 24" 26" 27" LCD LED TV Monitor Flat Panel Screen A63 List Price: $59.99 Sale Price: $14.99 Used From: $15.52 |
|
The new clean design mount is sensible cantilever mounting solution for small flat panels. The flexible articulating LCD wall mount supports flat screens with VESA 50x50(2"x2")/ 75x75(3"x3") or 100x100(4"x4")... |
 |
Cheetah Mounts ALAMLB LCD TV Wall Mount Bracket with Full Motion Swing Out Tilt and Swivel Articulating Arm for 23-37" Flat Screen Displays with VESA 100 or 200 Mount Patterns List Price: $89.96 Sale Price: $19.50 |
|
This mount fits the majority of displays in the 23-32" size range and some models up to 42". Specifically, it fits VESA 50 - 200 hole patterns and TVs weighing up to 65lbs. If you are unfamiliar with VESA patterns, these are square or rectangular patterns between 2 and 8 inches per side... |
 |
VideoSecu Large Heavy Duty Tilt and Swivel Cantilever Retractable TV Wall Mount Dual Arm for Flat Panel TVs Extension 25 inch with Free 7 FT HDMI Cable M09 Sale Price: $59.90 |
|
These new dual arm cantilever mounts are a breakthrough in flat panel mount design, combining strength, easy installation, and striking product design that is unparalleled in the industry. The dual two-link arm design provides tilt and up to 160 degrees of swivel for virtually limitless viewing positions... |
 |
Unibrak UNB 550 Dual Arm Articulating Cantilever LCD Plasma LED TV Wall Mount 37" 42" 50" 58" 65" Extends 33" Sony LG Panasonic Samsung Pioneer List Price: $299.95 Sale Price: $94.50 |
|
Model UNB 550 Is one of the strongest mounts on the market today. It has easy to follow instructions with a Durable Powder Coated Finish. The color for this mount is Black VESA 800 compatable Solid Steel Arms Strongest on the Market Unlike the other mounts online this is made from heavy gauge steel on wont warp when fully extended... |
 |
Arrowmounts AM-P16B Cantilever Retractable Wall Mount for Flat Panel TVs up to 30 Inch, Black List Price: $84.99 Sale Price: $22.94 |
|
Features: Arrowmounts Cantilever Wallmount for Lcd Tvs up to 30-Inch. Two piece -Inchslide-in-Inch installation for easy mounting. Aluminum die casting construction and painting finish. Adjustment knob and geared joints for effortless operation... |
 |
Cheetah Mounts Articulating Arm Mount Bracket for VESA 100 LCD LED Flat Screen Monitor Displays/TVs 12"-24" up to 40lbs Tilt and Swivel List Price: $59.96 Sale Price: $14.90 Used From: $24.99 |
|
The ALAM 100x100mm VESA arm mount provides up to 12-Inch of extension, collapses to less than 2.5-Inch, has 180 degrees of rotation and +/- 20 degrees of tilt. The ALAM mount is constructed with 3LBS of steel providing a sturdy and reliable mount... |
 |
OmniMount VB35C B Black Full Motion Wall Mount for 13-32-Inch Flat Panel TV (Black) List Price: $59.95 Sale Price: $31.91 |
|
The VB35C fits most 13" - 32" flat panel TVs up to 35 lbs (15.9 kg) and is an affordable, low-profile full motion mounting option for small flat panel TVs. It seems that every day a new company appears on the scene touting its expertise, experience, and business acumen in the world of TV mounts, furniture, and accessories... |
|
|
Tilt/ Swivel Cantilever Flat Panel TV Wall Mount $19.49 Position your flat panel display exactly where you want it with this amazing wall mount Tilt and swivel cantilever mounts flat panel TVs Television mount is adjustable for your viewing needs |
|
|
Tilt/ Swivel Cantilever Flat Panel TV Wall Mount/ HDMI Cable $25.49 Position your flat panel display exactly where you want it with an amazing wall mount. This tilt and swivel cantilever mounts flat panel TVs. |
|
|
Pyle 10-24-inch Dual Arm Cantilever Flat Panel TV Wall Mount $32.49 This universal flat-panel tilt mount fits most 10-inch to 24-inch plasma or LCD flat panel TVs. Capable of holding up to 33 pounds, this wall mount features a dual arm cantilever design. |
Cantilever Flat Panel
Specifying Workstations for the Office
Introduction
The trend has been to simplify desk and workstation products but they can still be just as complex as seating products. Unlike an office chair, where the specification choices are likely to add to the features, for a desk or workstation the specification is more likely to be eliminating choices. Even with simplification there are a wide range of products to choose from and variations in terms of size, shape, type of frame, finishes and accessories. Contrary to general perception, human factors (anthropometrics) are as important as they are for chairs and as nearly everybody works with a visual display unit they should be considered to be “users” under the Display Screen Equipment Regulations.
User Needs
The starting point to any specification is the task analysis. This must be user centric, fitting the workstation and the tools used to the person and task; and not the other way around. Factors that might be considered are: the relative needs for teamwork, privacy and access to other people; the amount that the task involves writing, reading, keyboard operations and telephone use; the corporate ways of working, special features of the task and individual body size and special needs.
From the task analysis you ought to be able to reach general conclusions about the size, shape, layout, positioning and individual storage needs for the workstations; for example: who needs individual offices; how many team areas you need; whether they should face in or out. More information on task analysis can be found in BS3044: 1990 - Ergonomic Principles in the Design and Selection of Office Furniture.
Size
The size of the work surface is dictated by the task and the tools involved. In a call centre, working from an on-screen proforma and using telephone and keyboard, only a relatively small work surface is needed; on the other hand a journalist working with multiple sources of books and paper may need a large area to spread things out. The choice between a CRT monitor and a flat screen makes a big difference to the depth needed. Two important factors are:
The viewing distance to the screen, which for most people is in the range 500-700mm;
The clear space under the worksurface to allow movement for the feet and legs; in the UK the depth should be 600mm and the minimum width 600mm although 1,000mm is preferred.
Height and Height Adjustability
Since 1987 the accepted height for a fixed height desk has been 720mm but the consensus in Europe is that this is too low for the current population and this should be 740mm. There is a growing recognition that height adjustability is desirable for general use. Whether this is for sitting position only, standing position only or full range sit/stand depends on working practices (shared workstations should have adjustment), task and personal preference, for example many people like to take telephone calls standing up. A range of mechanisms is available, costs are proportional to the speed and ease of adjustment.
Cable Management
The main function of a cable management system is to carry cables safely to equipment. The system should protect cables from physical damage and wear; and remove trip hazards from the vicinity of the workstation. Cable runs should be smooth with no twists or kinks. Power and data cables should be separated and there are limits on the rating and number of equipments that can be connected to sockets. BS6396: 2002 provides details. The key points are the number and types of cables and the number and positions of entry and exit ports.
Screens, Storage, Accessories
Screens can perform many functions: optical separation; sound damping; cable management; mounting for storage and accessories. EN1023, in three parts gives the heights for optical separation, safety requirements and test methods. A load bearing screen can provide mounting for a wide variety of accessories and can usefully be used to mount flat screens.
The amount of storage needed depends on the quantity of working documents and policies on central filing. The most popular workstation storage is a free-standing pedestal, which allows a degree of flexibility (left hand/right hand). With overhead storage, consideration should be given to weights of items and the reach of individuals.
Construction
The common constructions are: panel end; individual legs; cantilever and beam. The main impact is visual as all can provide the requisite strength and stability. Beams allow flexible modular construction and can be used to provide long runs with no obstructions under the front edge. Depending on the thickness of the top there may need to be an upper frame near the edges of the work top. This needs to be considered in relationship to the clear space underneath as there is little tolerance on the space between the top of the thigh and the underside of the work surface for most sitting workers. MFC is the most usual worktop material, high pressure laminate is a more expensive and harder wearing material. Veneer is generally more expensive but visually cannot be beaten. Strength, stability and durability to EN527 should provide for a more than adequate working life.
Churn
Serious consideration must be given to how often it is anticipated that the workplace will be reconfigured. There will be a cost, either staff time or hire of professionals. If this will be rare, flexibility and ease of dismantling is not needed. If it will be frequent, then a much simpler system may be more appropriate. Frequent reconfiguration will also shorten service life.
About the Author